Industrial Automation
 
industrial automation

AC Drive - AC Drives, DC Drives, Servo Drives, SINAMICS G110 Inverter Chassis Units, Inverter Chassis Units,Frequency Inverters, Control Panels Instruments, Custom Control Panels, PLC Turnkey Projects

Micromaster 420/430/440, Inverters, 0.12 kW to 250 kW
 
home
 
about-us
 
products
 
contact-us
 
Enquiry
 
 
send e-mail
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
manufacturers

AC DRIVES

 
Micromaster 420/430/440, Inverters, 0.12 kW to 250 kW
 
request-quote
 
Sharpen your competitive edge. Totally Integrated Automation

With Totally integrated Automation (TIA), Siemens is the only manufacturer to offer an integrated range of products and systems or automation in all sectors - from incoming goods to out going goods. from the field level through the production control level to connection with the corporate management level. On the basis of TIA, we implement solutions that are perfectly tailored to your specific requirements and are characterized by a unique level of integration. This integration not only ensure significant reduction in interface costs but also guarantees the highest level of transparency across all levels.

It goes without saying that you profit from Totally integrated Automation during the entire life cycle of your plant - form the first planning steps, through operation, right up to modernization. Consistent integration in the further development of our products and systems guarantees a high degree of investment security here.

Totally integrated Automation makes a crucial contribution towards optimizing everything that happens in the plant and thus creates the conditions for a significant increase in productivity.


 

Inverter Micromaster

inverter
Inverter
request-quote
 
• Micromaster 420/430/440
 
 Micromaster 430
 Micromaster 440
 " The specialist for pumps and fans" with optimized  OP (manual/automized power yield
 "The all-purpose" with advanced vectors, control  (with and  without encoder feedback) for versatile  applications in sectors  such as conveying systems,  textiles, elvators, hoisting  equipment and machine  costruction
 7.5 kW to 250 kW
 0.12 kW to 250 kW
 3 AC 380 V to 480 V

 1 AC 200 V to 240 V
 3 AC 200 V to 240 V
 3 AC 380 V to 480 V
 3 AC 500 V to 600 V

 • vir characteristic
 • Multipoint characteristic (programmable Vircharacteristic)
 • FCC (flux current control)

 • Vir characteristic
 • Multipoint characteristic (programmable vir characteristic)
 • FCC (flux current control)
 • Vector control

 
 Internal PID controlle
 
 Internal PID controller (autotuning)
 6 digital inputs
 2 analog inputs
 1 PTC/KTY input

 6 digital inputs
 2 analog inputs
 1 PTC/KTY input

 2 analog outputs
 3 relay outputs

 2 analog outputs
 3 relay outputs

 The ideal partner for your automation tasks, whether  with  SIMATIC S7-200, SIMATIC S7-300/400 (TIA) or  SIMOTION
 The ideal partner for your automation tasks, whether  with  SIMATIC S7-200, SIMATIC S7-300/400 (TIA) or  SIMOTION

 • Low-energy mode
 • Load torque monitoring (detects dry run of pumps)
 • Motor staging
 • Bypass mode
 • BICO technology

 3 selectable drive data kits
 • Integrated brake chopper (up to 75 kW)
 • Torque control
 • BICO technology

 
Micromaster 430
request-quote
 

• Micromaster 420 - Description

Micromaster 420
request-quote

Application
The MICRO MASTER 420 in verter is suitable for a variety of variable-speed drive applications. It is especially suitable for applications with pumps, fans and in conveyor systems. It is the ideal cost-optimized frequency inverter solution. The inverter is especially characterized by its customer-oriented performance and easeof-use. Its large mains voltage range enables it to be used all over the world.

Design
The MICRO MASTER 420 in verter has a modular design. The operator panels and communication modules can be easily exchanged without requiring any tools.

Main characteristics
• Easy, guided start-up
• Modular construction allows maximum configuration flexibility
• Three fully programmable isolated digital inputs
• One analog input (0 V to 10 V, scaleable) or for use as 4th digital input
• One programmable analog output (0 mA to 20 mA)
• One programmable relay output (30 V DC/5 A resis­tive load; 250 V AC/2A in­ductive load)
• Low-noise motor operation through high pulse frequen­cy, adjustable (observe de­rating if necessary)
• Complete protection for motor and inverter.


Options (overview)
• EMC filter, Class A/B
• LC filter
• Line commutating chokes
• Output chokes
• Gland plates
• Basic Operator Panel (BOP) for parameterizing the inverter
• Advanced Operator Panel (AOP) with multi-language plain text display
• Asian Advanced Operator Panel (AAOP) with Chinese and English plain text dis­play
• Cyrillic Advanced Operator Panel (CAOP) with Cyrillic, German and English plain text display
• Communication  modules
- PROFIBUS
- DeviceNet
- CANopen
• PC connection kits Mounting kits for installing the operator panels in the control cabinet doors
• PC start-up programs exe­cutable under Windows 98 and NT/2000/ME/XP Professional
• TIA integration with Drive ES

International standards
• The MICROMASTER 420 inverter complies with requirements of the EU voltage guideline
• The MICROMASTER 420 inverter has the CE marking
• acc. to and c certified
• C-tick


Note : See Appendix for standards

 
 

• Micromaster 430 - Description

Micromaster 430
Micromaster 430
request-quote
Micromaster 430
request-quote

Application
The MICROMASTER 430 in verter is suitable for a variety of variablespeed drive applications. Its flexibility provides for a wide Spectrum of applications. It is especially suitable for use with industrial pumps and fans. The inverter is especially characterized by its Customer oriented performance and ease of use. It has more inputs and outputs than the MICRO MASTER 420, an optimized operator panel with manual/automatic switchover and adapted software functionality.

Design
The MICROMASTER 430 in verter has a modular design. The operator panels and communication modules can beeasily exchanged.

Main characteristics
• Easy, guided startup
• Modular construction allows maximum configuration flexibility
• Six programmable isolated digital inputs
Two scaleable analog inputs (0 V to 10 V, 0 mA to 20 mA) can also be used as a 7th/8th digital input
Two programmable analog outputs (0 mA to 20 mA)
• Three programmable relay outputs (30 V DC/5 A resis tive load; 250 V AC/2A inductive load)
• Low-noise motor operation thanks to high pulse frequencies, adjustable (observe derating if necessary)
• Complete protection for motor and inverter
• Control of up to three additional drives on the basis of PID control (motor staging)
• Operation of drive directly on mains (with external by pass circuit)
• Low-energy mode
• Detects dry run of pumps (belt failure detection)

Options (overview)
• Line commutating chokes
• Output chokes
• LC filter and sinusoidal filter
• Gland plates
• Basic Operator
Panel 2 (BOP-2) for parameterizing the inverter
• Communication modules
- PROF/BUS
- DeviceNet
- CANopen
• PC connection kits
• Mounting kits for installing the operator panels in the control cabinet doors
• PC start-up tools executable under Windows 98 and NT/2000/ME/ XP Professional.
TlA integration with Drive ES

International standards
The
MICROMAS 430 inverter Complies with the requirements of the EU low voltage guideline
The
MICROMASTER 430 inverter has the CE marking
• acc. to and c certified
• C-tick

Note : See Appendix for standards

 
 
Micromaster 440 - Description
Micromaster 440
Micromaster 440
 
Micromaster 440
request-quote

Application
The MICROMASTER 440 inverter is suitable for a variety of variable speed drive applications. Its flexibility provides for a wide spectrum of applications. These also include cranes and hoisting gear, high-bay warehouses, production machines for food, beverages and tobacco, packaging machines etc.; i.e. applications which require the frequency inverter to have a higher functionality and dynamic response than usual. The inverter is especially characterized by its customer-oriented performance and ease of use. Its large mains voltage range enables it to be used all over the world.

Design
The MICRO MASTER 440 inverter has a modular design. The operator panels and modules can be easily exchanged.

Main characteristics
• Easy, guided start-up
• Modular construction allows maximum configuration flexibility
• Six programmable isolated digital inputs
• Two scaleable analog inputs (0 V to 10 V, 0 mA to 20 mA) can also be used as a 7th/8th digital input
• Two programmable analog outputs (0 mA to 20 mA)
• Three programmable relay outputs (30 V DC/5 A resis­tive load; 250 V AC/2A inductive load)
• Low-noise motor operation thanks to high pulse frequencies, adjustable (observe derating if necessary)
• Complete protection for motor and inverter.

Options (overview)
• EMC filter, Class A/B
• LC filter and sinusoidal filter Line commutating chokes Output chokes
• Gland plates
• Basic Operator Panel (BOP) for parameterizing the inverter
• Plain text Advanced Operator Panel (AOP) with multilanguage display
• Plain text Asian Advanced Operator Panel (AAOP) with Chinese and English display
• Plain text Cyrillic Advanced Operator Panel (CAOP) with Cyrillic, German and English display Communication    modules
- PROFIBUS
- DeviceNet
- CANopen
• Pulse encoder evaluation module
• PC connection kits
• Mounting kits for installing the operator panels in the control cabinet doors
• PC start-up tools executable under Windows 98 and NT/2000/ME/XP Professional
• TIA integration with Drive ES.

International standards
The MICROMASTER 440 inverter complies with the requirements of the EU low voltage guideline
The MICROMASTER 440 inverter has the CE marking
• acc. to and c certified
• C-tick


Note : See Appendix for standards

 
 
• Micromaster 420/430/440 - Appendix
Overview of frequency inverters/converters for SIMATIC ET 200 distributed I/O (continued)
Frequency inverters are available for the SIMATIC ET 200 distributed I/O that are fully system integrated modules. Inverters are available for the finely modular SIMATIC ET 200S FC system to the IP20 degree of protection as well as for the cabinet free SIMATIC ET 200pro FC system to the IP65 degree protection. With a broad range of possibilities, the frequency inverters expand the functional scope of the modular modules that are available in both systems e.g. inputs and outputs, technology modules, direct and soft starters). With suitable interface modules, connection to PROFIBUS and PROFINET IS possible via the ET 200 system bus as well as integration of PLC functionality into the system. Failsafe frequency inverter functions can be activated locally or via PROFlsafe. An overview of the features of the SIMATIC ET 200 pro Frequency Inver er series IS given In the table below. The complete product spectrum including ordering data, technical data and explanations can be found in Catalog IK PI "Industrial Communication for Automation and Drives" (SIMATIC ET 200pro FC will be available soon)
 

 SIMATIC ET 200pro FC

 Main features

 • Complete embedding of a frequency inverter into a distributed I/O system to IP65 degree of
    protection
 • Easy assembly and low susceptibility to errors thanks to self-assembling energy and    communications bus
 • Fast replacement of the frequency inverter during servicing without interruption of the bus
   communication to other modules within the SIMATIC ET 200pro FC
 • Frequency control (V/f), vector control without encoders
 • Line-commutated regenerative feedback by power electronics of the latest  generation
 • Frequency inverter variant with integrated, autonomous, fail-safe functions without the need for
   complex external wiring

 Rated outputs

 1.1 kW(atO... 55 °C ambient temperature)
 1.5 kW (at 0... 45 °C ambient temperature)

 Input voltage

 3 AC 380 . . 480 V ± 10%

 
Overall width
 
155 mm

 Mains frequency

 47... 63 Hz

 
Overload capability

 • Overload current 1.5 x rated output current (i.e. 150% overload) over 60 s, cycle     time 300 s
 • Overload current 2 x rated output current (i.e. 200% overload) over 3 s, cycle time     300 s

 
Output frequency

 0 ... 650 Hz

 
Pulse frequency

 • 4 kHz (standard)2... 16 kHz (in steps of 2 kHz)

 
Frequency bands that  can be skipped

 1, programmable

 
Efficiency

 ≥ 96%

 
Interfaces

 • Connection to PROFIBUS through IM154-1 and IM154-2 interface modules
 • Available soon connection to PROFINET over IM154-4PN interface modules and connection to
   IM154-8 CPU interface modules
 • Optical interface with USS protocol for fiber-optic RS232 connecting cable
 • Control signal for 180 V DC electromagnetic motor brake
 • Slot for an optional memory card (MMC) for uploading or downloading parameter  settings
 • PTC/KTY84 interface for motor temperature monitoring
 • Activation of the integrated safety functions through the Safety Local Isolator  Module F RSM or
   through F-Switch PROFlsafe

 
Standards conformance

 UL, cUL, CE, Low-Voltage Directive 73/23/EEC, EMC Directive 89/336/EEC

 
Functional safety

 Variant with integral safety functions to Category 3 of EN 954-1 and SIL 2 of IEC  61508:
 • Safety torque off
 • Safely limited speed
 • Safe stop 1
 The safety functions "Safely limited speed" and "Safe stop 1" are certified for  encoderless  asynchronous motors.
 • These safety functions are not approved for pull-through loads as in the case of  lifting gear and
    winders

 
Degree of protection

 IP20

 
Standard frequency inverters
Failsafe Frequency inverters

SIMATIC ET 200pro FC Standard
frequency inverter

SIMATIC ET 200pro FC Failsafe Frequency
inverter with integrated safety functions

 
request-quote
overview of SINAMICS G110 inverter chassis units

SINAMICS G110 inverter chassis unit is a versatile drive. The table provides an overview of the features of this product. The complete range of products together with ordering data, technical data and explanations are indicated in the D 11.1 Catalog "SINAMICS G110/SINAMICS G120 Inverter Chassis Units and SINAMICS G120 D Distributed Frequency Inverters"
 

 SIMATIC G110

 Main features

 As "a versatile drive for small outputs", the frequency inverter of the SINAMICS
 G110 inverter chassis units can be used for a wide range of industrial drive  applications with variable speeds. The especially compact SINAMICS G110 inverter  works with voltage-frequency control (V/f) and is the ideal frequency inverter in the  lower output and performance range of the SINAMICS family of products. The  inverter  is available in three frames for connection to single-phase power supply  systems.

 Electrical data
 Supply Voltages
 Output range

 1 AC 200 V... 240 V, ±10%; 0.12 kW... 3.0 kW

 

 Network types

 IT, TN, TT

 Mains frequency

 50/60 Hz

 Output frequency

 0 Hz ... 650 Hz

 Control method

 V/f control, linear (M~n)
 V/f control, quadratic (M~n2)
 V/f control, programmable

 Fixed frequencies

 3, programmable

 Skip frequency ranges

 1, programmable

 Digital inputs

 3 programmable digital inputs 24 V DC

 Analog input
 (for the analog version)

 1 analog input for setpoints from 0 V to 10 V, scalable or usable as 4th digital input 

 Digital output

 1 digital output 24 V DC

 Communication  (interface for USS  version)

 RS485 serial interface for operation with USS protocol

 Software functions




 Functions
 Protection functions
 • Automatic restart after interruption of operation due to supply failure
 • Jerk-free connection of inverter to rotating motor
 • Programmable ramp-up/ramp-down times
 • Ramp rounding

 • Undervoltage
 • Overvoltage
 • Earth fault
 • Short-circuit
 • Stall prevention
 • I2t motor thermal protection
 • Inverter overtemperature
 • Motor overtemperature
 Connectable motors

 Mechanical data
 Degree of protection
 Asynchronous motors

 
 IP20
 Type of cooling for
  ≥ 0.75 kW inverters
 > 0.75 kW inverters

 Standards
 Standards complied  with

 Ribbed heat sink with convection cooling; version with flat heat sink also available Internal
 air cooling (integrated fan)


 CE, UL, cUL, c-tick
 
Inverter Chassis Units
request-quote
 

Overview of SINAMICS G120 inverter chassis units

The SINAMICS G120 inverter chassis unit is a modular drive. The table provides an overview of the features of this products. The Complete ragne of products together with ordering data, technical data and explanations are indicated in the D 11.1 Catalog "SINAMICS G110/SINAMICS G120 Inverter Chassis Units and SINAMICS G120 Distributed Frequency Inverters"
 

 SIMATIC G120

 Main features

 As "a modular drive for low and medium outputs", the frequency inverter of the  SINAMICS G120 inverter chassis units can be used for a wide range of industrial  drive  applications the SINAMICS G120 frequency inverter distinguishes itself through  its  modular design (Power Module and Control Unit), and the globally unique  integration  of numerous innovative functions in safety technology and regenerative  feedback into  the line supply. There are extensive systems components a available  in the range  from 0.37 to 90 kW. This means that the drive units are suitable for a  multitude of  drive application.

 Electrical data
 Supply Voltages
 Output range

 3 AC 380 V... 480 V, ±10%; 0.37 kW... 90 kW

 

 Network types

 IT, TN, TT

 Mains frequency

 47... 63 Hz

 Output frequency

 0 Hz ... 650 Hz

 Control method

 V/f control, linear (M~n)
 V/f control, quadratic (M~n2) and parameterizable sensories vector control, vector  control with  encoder (closed control loop)  Torque control

 Fixed frequencies

 16, programmable

 Digital inputs

 Up to 9 digital inputs, depending on the Control Unit 24 V DC

 Analog input
 (for the analog version)

 Up to 2 analog inputs (0 V to 10 V)

 Digital output

 1 digital output 24 V DC

 Communication  interface

 Functions
 Software functions

 RS485/USS : PROFIBUS : PROFINET


 • Programmable ramp-up times 0 ... 650 s, ramp rounding
 • Automatic restart after interruption of operation due to supply failure
 • Flying restart
 • Signals are locally pre-processed using free function blocks
 • 3 selectable motor data sets
 • High-quality internal PID controller for simple process control
 • Positioning ramp down
 • Kinetic buffering

 Protection functions  • Motor temperature (PTC/KTY, I2t)
 • Power unit and load cycle monitoring
 • Overvoltage and undervoltage
 • Earth fault
 • Stall prevention
 • System protection functions
 Safety Integrated  Functions  STO, SS1, SLS, SBC
 Connectable motors

 Mechanical data
 Degree of protection
  Asynchronous motors

 
 IP20
 Cooling Method


 Standards
 Standards complied  with

 Innovative cooling concept; the power electronics are cooled by means of heat sinks  with  an external fan; open-loop and closed-loop control electronics are cooled by  convection


 CE, UL, cUL, c-tick, Safety Integrated IEC 61508/SIL 2
 
Inverter Chassis Units
request-quote
 

Overview of SINAMICS G120D distributed frequency inverters

The SINAMICS G120D frequency inverter is a modular drive. The table provides an overview of the features of this products. The Complete ragne of products together with ordering data, technical data and explanations are indicated in the D 11.1 Catalog "SINAMICS G110/SINAMICS G120 Inverter Chassis Units and SINAMICS G120D Distributed Frequency Inverters"
 

 SIMATIC G120D

 Main features

 "The modular drive for low and medium outputs" - the SINAMICS G120D  distributed  frequency  inverter can be especially used for sophisticated conveyor  applications in  industry as for many  other high-performance applications. The  SINAMICS G120  frequency inverter distinguishes  itself through its modular design  (Power Module and  Control Unit) as well as through its  extremely flat type of  construction, an identical  drilling template for all outputs and a high degree  of safety.  It offers safety functions  that are unique in its class. It helps to save   significant  amounts of energy as a result  of its line-commutated regenerative   feedback  capability. It goes  without saying that  the frequency inverter is also   capable of  communications.

 Electrical data
 Supply Voltages
 Output range

 3 AC 380 V... 480 V, ±10%; 0.75 kW... 7.5 kW

 

 Network types

 IT, TN, TT

 Mains frequency

 47... 63 Hz

 Output frequency

 0 Hz ... 650 Hz

 Control method

 V/f control, linear (M~n)
 V/f control, quadratic (M~n2) and parameterizable sensories vector control, vector  control with  encoder (closed control loop)  Torque control

 Fixed frequencies

 16, programmable

 Digital inputs

 Up to 6 digital inputs, depending on the Control Unit 24 V DC

 Analog input
 (for the analog version)

 Up to 2 analog inputs (0 V to 10 V)

 Digital output

 3 digital inputs

 Communication  interface

 Functions
 Software functions

 PROFIBUS : PROFINET


 • Programmable ramp-up times 0 ... 650 s, ramp rounding
 • Automatic restart after interruption of operation due to supply failure
 • Flying restart
 • Signals are locally pre-processed using free function blocks
 • 3 selectable motor data sets
 • High-quality internal PID controller for simple process control
 • Positioning ramp down
 • Kinetic buffering

 Protection functions  • Motor temperature (PTC/KTY, I2t)
 • Power unit and load cycle monitoring
 • Overvoltage and undervoltage
 • Earth fault
 • Stall prevention
 • System protection functions
 Safety Integrated  Functions  STO, SS1, SLS
 Connectable motors

 Mechanical data
 Degree of protection
  Asynchronous motors

 
 IP65
 Cooling Method

 Standards
 Standards complied  with

 Convection cooling, for higher outputs with fan


 CE, UL, cUL, c-tick, Safety Integrated IEC 61508/SIL 2
 
Distributed-Frequency Inverters
request-quote
 
 

• Micromaster 420/430/440 - Appendix

A&D in the WWW
automation  

A detailed knowledge of the range  of products and services available is  essential when pianning and  configuring automation systems. It  goes without saying that this  information must always be fully  up- to-date.

The Siemens Automation and Drives  Group (A&D) has therefore built up a  comprehensive range of information  in the World Wide Web, which offers  quick and easy access to all data  required.

You will find everything you need to  know about products, systems and  services.

 
 

Product selection using the Offline Mall of Automation and Drives

Drives  

Detailed information together with  convenient interactive functions:
 The Offline Mall CA 01 covers more  than 80,000 products and thus  provides a full summary of the  Siemens Automation and Drives  product base.

 Here you will find everything that you  need to solve tasks in the fields of  automation, switchgear, installation  and drives. All information is linked  into a user interface which is easy to  work with and intuitive.

 After selecting the product of your  choice you can order at the press of  a button, by fax or by online link.


 

Easy shopping with the A&D Mall

a&d_mall  

The A&D Mall is the virtual department store of Siemens AG in  the Internet. Here you have access  to a huge range of products  presented in electronic catalogs in an  informative and attractive way.

Data transfer via EDIFACT allows the  whole procedure from selection  through ordering to tracking of the  order to be carried out online via the  Internet.

Numerous functions are available to  support you.

 For example, powerful search  functions make it easy to find the  required products, which can be  immediately checked for availability.  Customer-specific discounts and  preparation of quotes can be carried  out online as well as order tracking  and tracing.

 

 
 

Micromaster 420/430/440 - Appendix

Micromaster Appendix
 

In the face of harsh competition you need optimum conditions to op ahead all the time:
strong starting position, a sophisticated strategy and team for necessary support - in every phase. Service & Support from Siemens provides this support with a  complete range of different services  for automation and drives.

In every phase: from planning and commissioning to maintenance and  upgrading.

Our specialists know when and where to act to keep the produc­y and cost-effectiveness of your system running in top form.

 
 
Technical consulting
Support in the planning and designing of your project from detailed actual-state analysis, target definition and consulting on product and system questions right to the creation of the automation solution.


Configuration and software engineering

Support in configuring and developing with customer-oriented services from actual configuration to implementation of theautomation project.
 
Service
 
Service on site
With service on site we offer services for startup and mainte­nance, essential for ensuring system availability.

In Germany
Phone: +49 (0)180 50 50 444
(0.14 €/min. from the German fixed network)

In the United States, call toll-free:
Phone: +1 800 333 7421

In Canada, call:
Phone: +1 888 303 3353
 
 
Online support
 
Online support
The comprehensive information system available round the clock via Internet ranging from Product Support and Service & Support services to Support Tools in the Shop.

 
 
technical
 

Technical Support
Competent consulting in techni­cal questions covering a wide range of customer-oriented services for all our products and systems.

Phone: +49 (0)180 50 50 222,
Fax: +49 (0)180 50 50 223

(0.14 €/min. from the German fixed network)

E-Mail: adsupport@siemens.com

In the United States, call toll-free:
Phone: +1 800 333 7421, Fax: +1 423 262 2200
E-Mail: solutions.support@sea.siemens.com


In Canada, call:
Phone: +1 888 303 3353

E-Mail: cic@siemens.ca

In Asia:
Phone: +86 10 6475 7575, Fax: +86 10 6474 7474
E-Mail: adsupport.asia@siemens.com

 
 
 

   
   
 
 
contact us sitemap home